Excellent Weatherability Kevlar Aramid PTFE Packing

Chat Now
Product Details

1.jpg

Kevlar Aramid PTFE Packing


kevlar packing inpregnated with PTFE from Tenglong


kevlar packing Tenglong-wps图片

Kevlar PTFE Graphited Packing Features:
It is a high-quality baided packing made of PTFE yarns fiber with incorporated graphite and the reinforced corner yarns of Aramid fiber. It can presence of high pressure and temperature. It has good sliding velocity and thermal conductivity. It enables to seal high pressure piston pump during a long running period. It can be used seal water, sewage water, hot water, oils, Greases, weak acids and alkaline solutions, abrasive medium

Teflon Packing is suitable for seals valve and seals pump used in food processing, pharmaceuitcal, paper mills, fiber plant, where high purity and corrosion resistance is required. Without any lubricant. (Food grade packing) 


Specification
:
Size: 3.0mm - 50mm
Material: 100% PTFE yarn braided ptfe packing

Pressure
Mpa
2
20
25
Temperature
C
<280
Linear speed
M/s
20
2
2
PH range
2~12








Kevlar Packing 多-wps图片

Our clients can avail from us a comprehensive range of PTFE & Kevlar Corner Packing. We ensure that these packings are manufactured using supreme-grade raw-material procured from our reliable sources. These packings are a cross braided packing designed with lubricated pure PTFE on the faces and special yellow synthetic fibre filaments on the ends. Widely used in dairies, high pressure pump handling carbonate and ammonia solutions in the fertilizer industry, pharmaceutical industries and refineries, and others.


Some features of this product are:

 

  • Reliable

  • High tensile strength

  • Cost-effective

  • Easy to use

  • Smooth design

  • Temperature: -200° C to +260° C

  • Ph range: 2 - 12

  • Pressure: 180 kg/cm2

  • Velocity: 12 mtrs/sec


Aramid kevlar braided packing is made of Du Pont's Kevlar yarn impregnated with PTFE dispersion and processed with lubricant.braided into square cross section.
As the strength and module of Kevlar is as high as the steel-like strength. So this packing compared with other kinds of braided packing. they can resist more serve media and higher pressure. It can be installed separately or as end rings with other kinds of packing to combine different characteristics into packing set.

Aramid Fiber Packing Prime Features:
> It is wear resistant but may damage the shaft if not used properly. 
> A minimum shaft hardness of 60HRC is therefore recommended.
> Superior performance
> Lower frictional factor


The aramid packing is woven from aramid fiber impregnated polytetrafluoroethylene emulsion and lubricant. Has good chemical resistance, high rebound, low cold flow. It has excellent high-speed, high-modulus properties (known as man-made metal wires). It has three times the strength of the wire and is five times lighter than the wire. Therefore, it can be used alone or in combination with other packings, as opposed to other types of packing, against particulate crystalline media and higher temperatures. A good asbestos replacement on the pump system.


Aramid fiber braided packing (aramid packing) is made of imported aramid fiber, impregnated with PTFE emulsion, etc.


Square section. Due to the strength and modulus of the imported aramid fiber, the packing has a higher medium and pressure than other various braided packings. It can be installed separately from other types of packing or as an end face. The ring can form a packing group of various characteristics.




1.jpg


 

(1).jpg

_08.jpg

_09.jpg

_10.jpg

1. What is your MOQ?

MOQ may vary by customer's special requirement; we try our best to meet your business requirement.  

2. What's your payment terms?

We normally do T/T, and we can also offer western union account for transfer money. And more flexible payment terms, welcome to have a discuss.  

3. Can you provide samples?

Yes, we can offer samples, and some samples are free  

4. Can you delivery by express?

Yes, we can delivery by any express.  

5. When will the sample be ready?

Normally, the sample can be ready in 3 days.

Feedback