EPDM/PTFE Manlid Seal From Sunpass Was Exported To Australia

Description:

This manlid seal combines the resilience and compression set resistance of EPDM rubber with the outstanding chemical resistance of PTFE. The seal's rectangular elastomeric core is enveloped on three sides:  top and bottom sealing faces and the inside diameter) with 100% virgin PTFE.

Prime features

Excellent chemical resistance. Withstands repeated opening/closing cycles without loss of sealing integrity.


Chemical properties:

The PTFE envelope makes the sealing faces and inside diameter chemically inert to media in the range pH 0-14 including all bulk liquid cargoes in all IMO classes. The virgin PTFE is non-absorbent, non-tainting, and hygienic for use with foodstuffs and edible oils.


Service capabilities:

Tank maximum pressure: 4bar

Maximum temperature: +110 degC

Minimum temperature: -25 degC


Standard Size:

DN500 (14MM *12MM) SECTION*484MM INNER DIA.
DN500 (14MM *14MM) SECTION*484MM INNER DIA.
DN300 (14MM *10MM) SECTION*294MM INNER DIA.


Pictures:

EPDM-PTFE Manlid Seal PTFE1_(1)

EPDM-PTFE Manlid Seal PTFE1_


Tenglong sealing since1979, specializes in producing high quality Packing, including: Kevlar Gland PackingPTFE Gland PackingGraphite Gland PackingCarbon Gland PackingRamie Gland PackingPTFE GasketsGraphite Gasket, Graphite Ring, EPDM/PTFE Envelop Gasket

For more products, please visit it www.tenglongsealing.cn

Welcome to mail:sales@sealings.cn or call 0574-62837600